Solvent-based high-penetration consolidating primer to even out surfaces. TECHNICAL DATA: Consistency: fluid liquid. Colour: transparent. Density (EN ISO 2811-1) (g/cm³): approx. 0.96. Dry solids…
Solvent-based high-penetration consolidating primer to even out surfaces.…
Waterproof, easy-to-clean acrylic paint for internal and external surfaces in permanent contact with water. TECHNICAL DATA: Consistency: thick liquid. Colour: colours from the colour chart range…
Waterproof, easy-to-clean acrylic paint for internal and external surfaces in…
Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40 minutes (at +23°C). Classification: EN 1504-5 and EN…
Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL…
Two-component epoxy resin with a very low viscosity for injecting into micro-cracks, also on wet surfaces. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 35 minutes (at…
Two-component epoxy resin with a very low viscosity for injecting into…
Expansive admix for controlled-shrinkage concrete. TECHNICAL DATA: Dosage: add between 5 and 8% on the amount of cement in the mix. Packaging: 20 kg bags. Also available in bulk quantities upon…
Expansive admix for controlled-shrinkage concrete. TECHNICAL DATA: Dosage: add…
Plasticizing and anti-shrinkage agent for slurries for injection Where to use Expanfluid can be used in preparing: – grouts for filling the casings of post-tensioning cables in pre-stressed concrete;…
Plasticizing and anti-shrinkage agent for slurries for injection Where to use…
Alkali-resistant fibreglass mesh for reinforcing interior and exterior levelling compounds. Alkali-resistant Fibreglass Mesh 4x4.5 mm, 1,000 mm long for insertion as reinforcing in the first layer…
Alkali-resistant fibreglass mesh for reinforcing interior and exterior…
Ultra rapid setting two-component polyurethane resin with fluid consistency, to be injected for consolidating and waterproofing of structures subject to weal water ingress Where to use –…
Ultra rapid setting two-component polyurethane resin with fluid consistency, to…
Keep in touch
