Waterproofing products

Mapei has developed various product systems to carry out secure waterproofing work, such as the range of cementitious and acrylic waterproofing products for terraces, balconies, bathrooms, road joists, basins and storage tanks, bentonite sheets, cementitious products and bitumen emulsions.

Waterproofing products

Waterproofing underground structures

FPO and HDPE fully-bonded membrane

FOAMJET F

Ultra rapid setting two-component polyurethane resin with fluid consistency, to be injected for consolidating and waterproofing of structures subject…

Ultra rapid setting two-component polyurethane resin with fluid consistency, to…

FOAMJET T

High viscosity ultra rapid setting two-component polyurethane resin, to be injected for consolidating and waterproofing of structures subject to…

High viscosity ultra rapid setting two-component polyurethane resin, to be…

IDROSILEX 2K

Cementitious mortar for waterproofing. Idosilex 2K is a two-component mortar, composed of a cement-based compound, selected graded aggregates,…

Cementitious mortar for waterproofing. Idosilex 2K is a two-component mortar,…

IDROSILEX PRONTO

Osmotic cementitious mortar suitable for contact with drinking water for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency:…

Osmotic cementitious mortar suitable for contact with drinking water for…

LAMPOSILEX

Ultra quick-setting and hardening hydraulic binder for blocking seeping water. TECHNICAL DATA: Consistency: fine powder. Workability time at +20°C:…

Ultra quick-setting and hardening hydraulic binder for blocking seeping water.…

MAPELASTIC FOUNDATION

Two-component, flexible cementitious mortar for waterproofing concrete surfaces subject to negative and positive hydraulic lift. TECHNICAL DATA:…

Two-component, flexible cementitious mortar for waterproofing concrete surfaces…

MAPEPROOF AL AP

Pre-applied, fully bonded, self-adhering, HDPE waterproofing membrane to protect against water underground structures

Pre-applied, fully bonded, self-adhering, HDPE waterproofing membrane to…

MAPEPROOF SWELL

Hydro-expansive, rubber-based hydrophilic sealant paste in tubes, applied using an extrusion pistol. TECHNICAL DATA: Consistency: thixotropic paste.…

Hydro-expansive, rubber-based hydrophilic sealant paste in tubes, applied using…

PLANISEAL 288

(Former Idrosilex 2K ) Two-component cementitious mortar for waterproofing structures below ground level and storage tanks. TECHNICAL DATA:…

(Former Idrosilex 2K ) Two-component cementitious mortar for waterproofing…

PLANISEAL 88 (Former Idrosilex Pronto)

Osmotic cementitious mortar suitable for contact with drinking water, for waterproofing masonry and concrete structures. TECHNICAL DATA: Consistency:…

Osmotic cementitious mortar suitable for contact with drinking water, for…

PLASTIMUL

Bitumen waterproofing emulsion for general purpose use. TECHNICAL DATA: Consistency: thick paste. Density: 1.2 g/cm³. pH: 10. Dry solids content:…

Bitumen waterproofing emulsion for general purpose use. TECHNICAL DATA:…

PLASTIMUL 1K SUPER PLUS

One-component, solvent-free, quick-drying, low-shrinkage, high-yield, high flexibility bitumen waterproofing emulsion containing polystyrene spheres…

One-component, solvent-free, quick-drying, low-shrinkage, high-yield, high…

PLASTIMUL 2K PLUS

Two-component, solvent-free, quick-drying, low-shrinkage, high flexibility bitumen waterproofing emulsion containing cellulose fibres. TECHNICAL…

Two-component, solvent-free, quick-drying, low-shrinkage, high flexibility…

PLASTIMUL MY

All-purpose, bituminous emulsion coating TECHNICAL DATA: Consistency: pasty liquid. Density: ~ 1,0 g/cm³. Solids content: ~ 40%. Storage: 12 months.…

All-purpose, bituminous emulsion coating TECHNICAL DATA: Consistency: pasty…

PLASTIMUL RBE MY

One-component, water-based, bituminous emulsion enhanced with rubber granules TECHNICAL CHARACTERISTICS Plastimul RBE MY is a water-emulsified,…

One-component, water-based, bituminous emulsion enhanced with rubber granules…

POLYPRIMER

Polyprimer is a bituminous solution based on oxidized bitumen and solvents with fast drying process.

Polyprimer is a bituminous solution based on oxidized bitumen and solvents with…

RESFOAM 1KM

One-component, ultra-fluid polyurethane resin applied by injection for waterproofing structures and ground and rocks subject to intense percolating…

One-component, ultra-fluid polyurethane resin applied by injection for…

Solutions for areas in contact with water

Waterproofing is a theme which we always approach with success by offering a wide range of specific, safe and long-lasting solutions. The main problem encountered by users is infiltrations in areas such as second pours, underground structures, terraces and roofs.