Can mortars be used to patch or level floors?

by

Mario Taglienti

 August 3, 2020. 5:39 PM

The title of this blog is a frequently asked question that tile installers have considered when a concrete or plywood substrate has dips or humps in the floor. Because mortar will stick to the concrete slab and the wood subfloor, and mortar will stick to mortar, then it would only make sense that mortar would work for leveling or patching, right? Well, the answer is actually no.

Mortars cannot be used to level or patch a floor – ever! The materials used in mortars render the product unstable once the thickness exceeds the manufacturers’ recommended maximum thickness.

Most thin-set mortars have a maximum thickness of 1/4" (6 mm) and medium-bed mortars have a maximum of 1/2" (12 mm). So of course, the next question is, “What if it is done in layers?” The answer again is no. Once the mortar is cured, each new layer becomes one with the previous layer; this makes the mortar unstable once curing has occurred.

 Self-Leveler Plus inset
Planipatch application

Now that we have established that mortars won’t work for leveling and patching, what can be done with a dip or a hump in the substrate? We recommend choosing a self-leveler or patch product instead.

MAPEI makes several different levelers and patches to accommodate a variety of issues that an installer may encounter on a tile-installation project. The most versatile self-leveler is Novoplan 2 Plus, a high-strength, cement-based underlayment and repair mix for use over interior concrete, plywood and other approved floor surfaces.

For smaller issues that only require patching and not necessarily the need to level an entire area, MAPEI makes a product called Planipatch, an ultra fast-drying, self-curing, polymer-modified, cement-based patching compound that rapidly develops high compressive strength and can be used to fill minor voids, holes and cracks.

Novoplan 2 Plus and Planipatch are easy to use, work exactly as intended and are readily available at a local distributor in your area. Every installer should have both a leveler and patching products ready to go when he or she starts a new project for a customer.

Looking for more tips for tile installation, as well as other flooring solutions? Visit our System Solutions portal here. At MAPEI, we believe that preparation and execution go hand in hand to obtain the best possible solution to any situation.

Products mentioned in the article

Planipatch
Planipatch
Fast-Setting, Polymer-Modified, Cement-Based Patching Compound Planipatch is an ultra fast-drying, self-curing, polymer-modified,…
Novoplan 2 Plus
Novoplan 2 Plus
Professional, Self-Leveling Underlayment Novoplan 2 Plus is a high-strength, self-leveling, cement-based underlayment and repair mix with a…

Author

Mario Taglienti

Mario Taglienti

Mario brings years of knowledge and expertise in his role as a Technical Support Advisor at MAPEI. He began working in the industry when his family started a flooring business back in 1976. Mario eventually went on to operate his own successful flooring company in Pennsylvania for 15 years before relocating to South Florida.

Comments

Load more comments

Log in or register to add a comment.

Keep in touch

Subscribe to our newsletter to get Mapei news