Project Sándor- Metternich Castle, Bajna


Yard	Facade maintenance for outbuildings with POROMAP SYSTEM on 1500 square meters, waterproofing.
Location	Bajna, Hungary
Subcategory	CASTLE
Application	Facade maintenance, waterproofng.
Start and finish date	2018/2021
Application Type	Concrete restoration systems, Masonry restoration, Waterproofing systems
Contractor company	Pharos ’95 Kft.
Installer companies	Pharos ’95 Kft.
Architects	Zoltán Erő, Palatinum Stúdió
MAPEI Distributor	Mapei Kft., Budaörs
Credits	Mário Bere
MAPEI Coordination	Zsolt Lakatos

ADDITIX PE

Admixture to make epoxy and polyurethane products thicker with a thixotropic consistency. TECHNICAL DATA: Appearance: powder. Colour: white. Density: 960 kg/m³. Consumption: 1.5-5% by weight on the…

Admixture to make epoxy and polyurethane products thicker with a thixotropic…

ADESILEX PG1

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1 is a two-component epoxy resin based product with special hardeners, selected fine aggregates and special additives.…

Thixotropic, two-component epoxy adhesive for structural bonding. Adesilex PG1…

KERAFLEX MAXI S1

High-performance deformable cementitious adhesive with no vertical slip, extended open time and Low Dust technology for ceramic tiles, particularly recommended for laying large porcelain and natural…

High-performance deformable cementitious adhesive with no vertical slip,…

Two-component, high-performance polyurethane adhesive with no vertical slip for ceramic tiles and stone material. TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours. Set to…

Two-component, high-performance polyurethane adhesive with no vertical slip for…

MAPEBAND EASY

Rubber tape sandwiched between two layers of non-woven fabric to form elastic joints in waterproofing systems

Rubber tape sandwiched between two layers of non-woven fabric to form elastic…

MAPECOAT I 600W

Two-component transparent epoxy primer in water dispersion for epoxy flooring application.

Two-component transparent epoxy primer in water dispersion for epoxy flooring…

MAPEFOAM

Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…

Closed cell polyethylene foam cord for the correct sizing of movement joints.…

MAPELASTIC

Two-component, flexible cementitious waterproofing mortar for waterproofing balconies, terraces, bathrooms, swimming pools and damp environments.

Two-component, flexible cementitious waterproofing mortar for waterproofing…

MAPESIL LM

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm².…

Neutral silicone mould-resistant sealant with BioBlock ® technology for stone…

MAPEWRAP 11

Normal setting thixotropic epoxy putty for levelling concrete surfaces. MapeWrap 11 is a two-component product based on epoxy resins, selected fine aggregate and special additives. MapeWrap 11 is…

Normal setting thixotropic epoxy putty for levelling concrete surfaces.…

MAPEWRAP 21

Two-component, super-fluid epoxy resin for impregnating MAPEWRAP using the “damp system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, super-fluid epoxy resin for impregnating MAPEWRAP using the…

MAPEWRAP 31

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using the “dry system”. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Workability time: 40 minutes (at +23°C). Bond…

Two-component, medium-viscosity epoxy adhesive for impregnating MAPEWRAP using…

MAPEWRAP PRIMER 1

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a two-component super-fluid solvent-free product based on epoxy resins, specific for the preparation of concrete surfaces that need…

Epoxy primer specific for the MapeWrap system. MapeWrap Primer 1 is a…

PLANITOP FAST 330

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: Where to use:…

Quick-setting, fibre-reinforced cementitious levelling mortar for internal and…

PLASTIMUL PRIMER

Solvent-free, bitumen primer for treating substrates before applying waterproofing products from the PLASTIMUL range. TECHNICAL DATA: Consistency: thixotropic, liquid. Density: 1 kg/l. pH: 10. Dry…

Solvent-free, bitumen primer for treating substrates before applying…

PRIMER 3296

Aqueous acrylic primer with excellent penetration effect for dusty screeds. Where to use: Consolidation of unsound substrates. Preparation of unsound screed surfaces before the installation of wooden…

Aqueous acrylic primer with excellent penetration effect for dusty screeds.…

TOPCEM PRONTO

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal efficiency for quick-drying (4 days) screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of TOPCEM PRONTO with 1.7 litres…

Ready-to-use, normal-setting, controlled-shrinkage mortar with high thermal…