Project New Technology Center McLaren, Woking

New Technology Center McLaren

Woking, United Kingdom

Ref #: 2867

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	new technology centre and wind tunnel
Location	Woking, United Kingdom
Subcategory	MULTIFUNCTIONAL CENTER
Built in	1999
Opened in	2004
Application	installation of ceramic and stone tiles on floors
Start and finish date	2000/2004
Application Type	Floor/wall coverings
Client	Tag McLaren, Surrey
Contractor company	Keir Build
Installer companies	Johns of Nottingham
Architects	Foster & Partners
MAPEI Coordination	Mark Louch, Mapei UK

Product used for the project

GRANIRAPID

Two-component, high-performance, deformable, quick-setting and hydrating cementitious adhesive for ceramic tiles and stone materials. TECHNICAL DATA: Consistency: comp. A: powder; comp. B: thick…

Two-component, high-performance, deformable, quick-setting and hydrating…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 45 minutes. Open…

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

MAPECEM

Special fast setting hydraulic binder for the preparation of rapid setting and drying (24 hours) screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on both…

Special fast setting hydraulic binder for the preparation of rapid setting and…

MAPECOAT I 24

Epoxy paint for acid-resistant coating of concrete surfaces. Mapecoat I 24 may be used for concrete floors, storage tanks and flumes which come into contact with aggressive chemicals, such as acids,…

Epoxy paint for acid-resistant coating of concrete surfaces. Mapecoat I 24 may…

MAPEFINISH

Two-component cementitious mortar for finishing concrete surfaces. Mapefinish is used to level small imperfections of poured concrete and to smooth surfaces after repairs. Mapefinish is suitable for…

Two-component cementitious mortar for finishing concrete surfaces. Mapefinish…

MAPELASTIC

Two-component, flexible cementitious waterproofing mortar for waterproofing balconies, terraces, bathrooms, swimming pools and damp environments.

Two-component, flexible cementitious waterproofing mortar for waterproofing…

MAPEPRIM SP

Two-component, solvent-free primer for smoothing compounds and adhesives on non-absorbent surfaces. TECHNICAL DATA: Consistency: comp. A: liquid; comp. B: liquid. Colours: comp. A: blue; comp. B:…

Two-component, solvent-free primer for smoothing compounds and adhesives on…

NIVOPLAN

Smoothing mortar for internal and external walls and ceilings for thicknesses from 2 to 20 mm. TECHNICAL DATA: Where to use: on walls for ceramic and natural stone coatings. Workability time: 2-3…

Smoothing mortar for internal and external walls and ceilings for thicknesses…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…