Project Hôpital de la Tour, Meyrin, Meyrin

Hôpital de la Tour, Meyrin

Meyrin, Switzerland

Ref #: 4544

Category: PUBLIC BUILDINGS AND PLACES

Construction


Yard	Floor coverings
Location	Meyrin, Switzerland
Subcategory	HOSPITAL
Built in	2016
Opened in	2019
Application	Delivery of products for floor coverings over an area of 12 000 square metres
Application Type	Installation of floors
Installer companies	Anhy SA, Plan-les-Ouates; Realsport Goup, Rossens
Architects	de Planta et Associés, Carouge; Aris Serbetis Architecte, Genève; Tridimensions architectes SA, Genève
Specialists involved	Hôpital de La Tour – construction management: Gestron Services (Suisse) SA, Genève
Credits	Sébastien Crettaz, Crans-Montana
MAPEI Coordination	Marcello Maieron

Product used for the project

MAPECEM PRONTO

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. Applications: For the formation of both floating and bonded screeds on either old or new floor…

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA:…

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…

PRIMER G

Synthetic resin primer in water dispersion with a very low content of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: blue. Dilution rate: from 1:1 to 1: 3 with water…

Synthetic resin primer in water dispersion with a very low content of volatile…

PRIMER MF

Two-component, solvent-free epoxy primer used as bonding promoter for products from the MAPEFLOOR range, for consolidating and waterproofing against residual damp on cementitious substrates and as…

Two-component, solvent-free epoxy primer used as bonding promoter for products…

ULTRABOND ECO V4 SP

Multi-purpose, acrylic adhesive in water dispersion with a long open time and very low emission level of volatile organic compounds (VOC), for laying rubber, PVC, vinyl, polyolephinic, linoleum and…

Multi-purpose, acrylic adhesive in water dispersion with a long open time and…

ULTRABOND ECO V4 SP CONDUCTIVE

Light-coloured adhesive in water dispersion with very low emission level of volatile organic compounds (VOC) for installing conductive vinyl, rubber and textile flooring. TECHNICAL DATA: Consistency:…

Light-coloured adhesive in water dispersion with very low emission level of…

ULTRABOND MS RAPID

Rapid-setting assembly adhesive for internal and external use with a high sucker effect. TECHNICAL DATA: Viscosity: thixotropic paste. Open time: 5’. Initial tensile strength: 25 N. Final shear…

Rapid-setting assembly adhesive for internal and external use with a high…