How to Apply Liquid Waterproofing Membranes for Internal and External Under-Tile Applications

  • PART 1: INTRODUCTION & STANDARDS
  • PART 2: SUBSTRATE PREPARATION & SELECTION
  • PART 3: DETAILING PREPARATION
  • PART 4: MAPEI PRODUCT SELECTION
  • PART 5: DOCUMENTATION & WARRANTIES

PART 1: INTRODUCTION AND STANDARDS

 

 

Watch in Chinese 🇨🇳

Free downloads:

(right-click and open documents in a new tab to avoid losing your progress on this page)

pdf
491 KB
pdf
363 KB
Benefits of becoming a Mapei Trained Applicator:

✔️ Equipped with the proper methodology of application

✔️ Receive technical support and advice

✔️ Able to apply for up to 15 years of product warranty

 

Want to be our next Mapei Trained Applicator?

Take Assessment

DO:
- This is an open-book test so feel free to go through the presentation at a comfortable pace til you find the answers you need for the assessment.
- Right-click to open all the documents, products, and other links in a new tab to avoid losing your progress on this page. Otherwise, you will have to start over. 


DON'T:
- Don't refresh the page until you're done with the assessment or you will lose all your progress.

 

Course Assessment 2020 

Here below are 20 multiple-choice questions for you to complete in order to validate your learning. Passing mark is 19 out of 20 and if passed, your MAPEI Trained Applicator number and card will be issued or renewed.

Click the "START ASSESSMENT" button to begin.

Before reaching the first test question, you'll have to complete two pages of information that are necessary for your Mapei Trained Applicator Card.

Important: Please be reminded that we do require an above-shoulders photo of you on a plain background for your MAPEI Trained Applicator Card. Recommendation: Don’t do a selfie. Ask a colleague (or someone other than yourself) to take a proper photo of you

Products covered during the course:

You can download Technical Data Sheets (TDS) and Safety Data Sheets (SDS) by clicking on each product individually.
*(right-click and open these products in a new tab to avoid losing your progress on this page)

Crack repair
EPORIP
EPORIP
Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24…
Primers
PRIMER 3296
PRIMER 3296
TECHNICAL DATA: Consistency: liquid. Colour: opaline. Dilution ratio: as is, 1:…
PLANISEAL MR
PLANISEAL MR
TECHNICAL DATA: Consistency: liquid. Colour: light grey - semi gloss when dry,…
Screeds for falls
MAPECEM PRONTO
MAPECEM PRONTO
TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately…
TOPCEM
TOPCEM
TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of…
MAPECEM
MAPECEM
DESCRIPTION: Special fast-setting hydraulic binder for the preparation of rapid…
Detail preparation products
MAPEBAND EASY
MAPEBAND EASY
TECHNICAL DATA: Type of material: rubber sandwiched between two layers of…
MAPEBAND SA
MAPEBAND SA
TECHNICAL DATA: Density: 1.6 g/cm³. Temperature of application: from +5°C to…
MAPEBAND TPE
MAPEBAND TPE
TPE tape for flexible sealing and waterproofing expansion joints and cracks…
MAPEBAND
MAPEBAND
Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%.…
BRANZ appraised waterproofing products
MAPELASTIC AQUADEFENSE
MAPELASTIC AQUADEFENSE
TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to…
MAPEGUM WPS - Liquid Waterproofing Membrane
MAPEGUM WPS - Liquid Waterproofing Membrane
DESCRIPTION: Quick-drying flexible liquid membrane for waterproofing internal…
MAPELASTIC SMART
MAPELASTIC SMART
Two-component, high-flexibility cementitious mortar, applied by brush or by…
MAPENET 150
MAPENET 150
TECHNICAL DATA: Colour: blue. Weight: 150 g/m² ± 5%. Mesh size: 4x4.5 mm.…
MAPETEX SEL
MAPETEX SEL
Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing…