Project Wellness center BEAUTY&BEAST, Velké Meziříčí

Wellness center BEAUTY&BEAST

Velké Meziříčí, Czech Republic

Ref #: 202006

Category: TOURISM AND WELLNESS


Yard	Wellness center
Location	Velké Meziříčí, Czech Republic
Subcategory	Spa
Built in	2019
Opened in	2020
Application	Complete construction of a wellness center - swimming pools, showers, steam, sauna, sanitary facilities
Start and finish date	2019/2020
Application Type	Floor/wall coverings, Waterproofing systems
Client	Petra Zak s.r.o.
Installer companies	Building centrum, RCJ
MAPEI Distributor	RCJ
Credits	MG Trade
MAPEI Coordination	Ing. Michal Lukas

Product used for the project

EPORIP

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24 hours. Final cure time: 15 days. Application: by brush, trowel, pouring. Storage: 24 months.

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

High-performance, deformable, rapid-setting and hydrating, non-slip cementitious adhesive with very low emission of volatile organic compounds for ceramic tiles and in particular for stone, including…

High-performance, deformable, rapid-setting and hydrating, non-slip…

MAPEBAND EASY

TECHNICAL DATA: Type of material: rubber sandwiched between two layers of non-woven polypropylene fabric. Thickness: 0.68 mm. Width: 130 mm. Tensile strength: 45 N/15 mm. Elongation at failure: 315…

TECHNICAL DATA: Type of material: rubber sandwiched between two layers of…

MAPEBAND SA

TECHNICAL DATA: Density: 1.6 g/cm³. Temperature of application: from +5°C to +30°C. Width: 100 mm. Thickness: approx. 2 mm. Packaging: 25 m rolls.

TECHNICAL DATA: Density: 1.6 g/cm³. Temperature of application: from +5°C to…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

PLANITOP FAST 330 - Levelling Mortar

DESCRIPTION: Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: …

DESCRIPTION: Quick-setting, fibre-reinforced cementitious levelling mortar for…

PRIMER FD

TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent straw yellow. Application: brush. Consumption: 5÷10 g/m (1 cm - deep joint). Packaging: 200 g bottles.

TECHNICAL DATA: Application of sealant: after 60 minutes. Colour: transparent…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…