Project OMEGA centrum sportu a zdraví, Olomouc


Yard	revitalization of the fitness section
Location	Olomouc, Czech Republic
Subcategory	GYM, LEISURE CENTRE, SPORT CENTER
Application	substrate leveling, laying the sports surface
Start and finish date	2019
Application Type	Concrete restoration systems, Floor/wall covering, Floor/wall coverings, Installation of floors, Products for sports flooring, Waterproofing systems
Client	GEMO SPORT a.s.
Installer companies	GEMO a.s.
MAPEI Coordination	Jan Bébar

EPORIP

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24 hours. Final cure time: 15 days. Application: by brush, trowel, pouring. Storage: 24 months.

Technical data: Pot life: 60 minutes. Open time: 5 hours. Setting time: 24…

KERAPOXY

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no vertical slip for laying and grouting ceramic tiles and stone material.

Two-component, high-performance, anti-acid epoxy mortar and adhesive with no…

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%. Packaging 50 m x 12 cm rolls; sealing gasket for outlets 118 x 118 mm and 300 x 300 mm; inside corner 90° outside corner 270°.

Technical data: Length: 50 m. Width: 120 mm. ULTIMATE ELONGATION: > 400%.…

MAPECEM PRONTO

TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of water. Workability time: 20-30 minutes. Set to light foot traffic: after 2-3 hours. Waiting time before…

TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

NIVORAPID

Ultra-fast drying thixotropic cementitious levelling mortar, also suitable for vertical applications. Applications: Interior levelling of all types of substrates normally found in the building…

Ultra-fast drying thixotropic cementitious levelling mortar, also suitable for…

TOPCEM

TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from 0 to 8 mm) and 120-140 kg of water for dry inerts. Workability time: 40÷60 minutes. Set to light…

TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of…

ULTRABOND ECO V4 SP FIBER

TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: approximately 0-10 minutes. Open time: 20-30 minutes. Set to foot traffic: 3-5 hours. Ready for service: 24-48 hours.…

TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time:…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…