Project Neftohimik Building,


Yard	Stone application and facade renovation
Location	Bulgaria
Subcategory	INDUSTRY
Built in	2019
Opened in	2020
Application	Products for ceramic and stone materials
Start and finish date	2019/2020
Application Type	Facade interventions, Installation of floors, Waterproofing systems
Client	Municipality of Burgas
Contractor company	Bulplast BG
Installer companies	Max Group
Project Manager	Marin Tzvetkov
MAPEI Coordination	Ivan Ivanov, Nikolay Zheliazkov, Petar Yankov

ADESILEX PG4

TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN…

TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70…

KERAFLEX MAXI S1

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: > 30 minutes. Waiting time before grouting: – on walls: 4-8 hours; – on floors: 24 hours. Set to foot traffic: approx. 24 hours. Ready…

TECHNICAL DATA: Pot life of mix: more than 8 hours. Open time: > 30 minutes.…

KERALASTIC T

TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours. Set to light foot traffic: approx. 12 hours. Ready for use: approx. 7 days. Deformability: highly deformable. Colours:…

TECHNICAL DATA: Open time: 50 minutes. Waiting time before grouting: 12 hours.…

MAPEFOAM

Closed cell polyethylene foam cord for the correct sizing of movement joints. Is available in skeins where the length is proportionate to the diameter. Applications: Placing at the base of the joints…

Closed cell polyethylene foam cord for the correct sizing of movement joints.…

MAPELASTIC AQUADEFENSE

TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to +35°C at +23°C and 50% R.H.. Waiting time between first and second coat: approximately 1 hour (at +23°C and 50% R.H.).…

TECHNICAL DATA: Consistency: paste. Application temperature range: from +5°C to…

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

PRIMER SN

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ±…

TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of…

TOPCEM

TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from 0 to 8 mm) and 120-140 kg of water for dry inerts. Workability time: 40÷60 minutes. Set to light…

TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of…

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

High-performance, anti-efflorescence, quick-setting and drying polymer-modified…