Two-component epoxy primer for oil contaminated cementitious surfaces. Where to use: Primer CC 200 is a special primer specifically formulated for oil contaminated cementitious surfaces and it is…
Two-component epoxy primer for oil contaminated cementitious surfaces. Where to…
HIGH-ELASTICITY MULTI-LAYERED SYSTEM MADE FROM ACRYLIC RESIN IN WATER DISPERSION AND GRANULAR RUBBER MATTING FOR PROFESSIONAL INDOOR AND OUTDOOR TENNIS COURTS
HIGH-ELASTICITY MULTI-LAYERED SYSTEM MADE FROM ACRYLIC RESIN IN WATER…
Acrylic waterborne, rapid film-forming, coloured coating to protect concrete and asphalt surfaces subject to a high level of footfall, including driveways.
Acrylic waterborne, rapid film-forming, coloured coating to protect concrete…
76208020001 - SPIDER P SA 2 MM | 76208035002 - SPIDER P SA 3.5 MM Cold flexibility:-10°C SPIDER P SA is a prefabricated SELF- ADHESIVE bituminous membrane of excellent quality, made with ADESO®…
76208020001 - SPIDER P SA 2 MM | 76208035002 - SPIDER P SA 3.5 MM Cold…
Two-component, versatile, decorative, acid-resistant epoxy grout, with a bacteriostatic agent and BioBlock® technology, easy to apply and clean, ideal for grouting ceramic tiles, glass mosaics and…
Two-component, versatile, decorative, acid-resistant epoxy grout, with a…
One-component, high-performance, deformable, lightweight, cementitious adhesive with no vertical slip and extended open time, Low Dust technology and extremely high yield. Easy to apply by trowel…
Mapecoat SF is a three-component, hard, colored, aromatic polyurethane finish with excellent resistance to
wear and abrasion Mapecoat SF is used to form a seamless, film-forming coat with good…
Mapecoat SF is a three-component, hard, colored, aromatic polyurethane finish…
High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.
High-performance, anti-efflorescence, quick-setting and drying polymer-modified…
The only flooring adhesive you need in the back of your van. Rapid and strong initial tack, very long open time, good dimensional stability, strong and tenacious final adhesion: the best performance…
The only flooring adhesive you need in the back of your van. Rapid and strong…
Synthetic resin primer in solvent, specific for improving adhesion of polyurethane coating products (from the PURTOP range) on existing bituminous membranes.
Synthetic resin primer in solvent, specific for improving adhesion of…
DESCRIPTION: Quick-setting, fibre-reinforced cementitious levelling mortar for internal and external floors and walls, applied in layers from 3 to 30 mm to even out irregularities. TECHNICAL DATA: …
Low viscosity ready-mixed mortar with high compressive strength and resistant to de-icing salts, freeze-thaw cycles and seawater, with exceptional physical chemical characteristics suitable for areas…
Low viscosity ready-mixed mortar with high compressive strength and resistant…
Pre-blended mortar with high compressive strength and good resistance to de-icing salts, freeze-thaw cycles and seawater with exceptional physical-chemical characteristics suitable for areas exposed…
Pre-blended mortar with high compressive strength and good resistance to…
DESCRIPTION: Three-component, self-levelling polyurethane-cement mortar with high resistance to chemicals for industrial floors, applied in thicknesses 3 to 6 mm. Complies with standards applied in…
High-performance, deformable, rapid-setting and hydrating, non-slip cementitious adhesive with very low emission of volatile organic compounds for ceramic tiles and in particular for stone, including…
High-performance, deformable, rapid-setting and hydrating, non-slip…
Save time and money Fast track your next interior levelling project Two coat application - apply the second as soon as the first coat is dry Install a levelling compound 2 to 5 hours after the second…
Save time and money Fast track your next interior levelling project Two coat…