TECHNICAL DATA: Movement in service (%): 25 (with PRIMER M or PRIMER A). Modulus of elasticity at 100% elongation: 0.8 N/mm². Shore A hardness (DIN 53505): 36. Workability time: 90 minutes. Colour:…
TECHNICAL DATA: Movement in service (%): 25 (with PRIMER M or PRIMER A).…
TECHNICAL DATA: Mixing ratio: A/B/C = 1.6/1.4/18 plus 0.25 parts by weight of MAPECOLOR PASTE. Colour of mix: depending on the colour of MAPECOLOR PASTE used. Pot life of mix at +20°C: 20 minutes.…
TECHNICAL DATA: Mixing ratio: A/B/C = 1.6/1.4/18 plus 0.25 parts by weight of…
TECHNICAL DATA: Type of fibre: A.R. type glass fibre. Weight: 225 g/m ² . Mesh size: 25 x 25 mm. Tensile strength (kN/m): 45. Elongation at failure: < 3%. Packaging: 45.70 m x 90 cm rolls.
TECHNICAL DATA: Type of fibre: A.R. type glass fibre. Weight: 225 g/m ² . Mesh…
DESCRIPTION: Synthetic resin-based primer in solvent solution to improve the adhesion of liquid elastic membranes (from the Aquaflex Roof line) onto existing bituminous membranes
DESCRIPTION: Synthetic resin-based primer in solvent solution to improve the…
DESCRIPTION: Two-component thixotropic epoxy adhesive with long workability time for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 50 minutes (at +23°C).…
DESCRIPTION: Two-component thixotropic epoxy adhesive with long workability…
Adhesive zinc plates applied directly on the surface of structures for galvanic cathodic protection against the corrosion of reinforcement rods in concrete. Mapeshield E comprises a 99.9% pure zinc…
Adhesive zinc plates applied directly on the surface of structures for galvanic…
TECHNICAL DATA: Consistency: thixotropic. Mixing ratio: comp. A: comp. B = 2.2 : 1. Pot life of mix: approximately 1 hour (at +20°C). Application temperature range: from +5°C to +40°C. Minimum…
TECHNICAL DATA: Mixing ratio: A/B/C = 2.6/2.7/20.5 plus 5 kg of MAPECOLOR CPU. Colour of mix: grey, beige, ochre, red and green. Consistency of mix: thick. Pot life of mix at +20°C: 15 minutes. Dust…
TECHNICAL DATA: Mixing ratio: A/B/C = 2.6/2.7/20.5 plus 5 kg of MAPECOLOR CPU.…
TPE tape for flexible sealing and waterproofing expansion joints and cracks subject to movements up to 5 or 10 mm, using Mapeband TPE 170 or Mapeband TPE 325 respectively. It is particularly…
TPE tape for flexible sealing and waterproofing expansion joints and cracks…
TECHNICAL DATA: Maximum dimension of aggregate: 1.5 mm. Mixing ratio: 1 25 kg comp. A with 1 drums of comp. B. Pot life of mix: approximately 1 hour (at +20°C). Thickness applied: from 3 to 10 mm per…
TECHNICAL DATA: Maximum dimension of aggregate: 1.5 mm. Mixing ratio: 1 25 kg…
TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of PLANITOP HDM MAXI comp. A with 1 part of PLANITOP HDM MAXI comp. B. Pot life of mix: approximately 1 hour (at +20°C).…
TECHNICAL DATA: Maximum dimension of aggregate: 1 mm. Mixing ratio: 4 parts of…
Fibreglass cord for impregnation with MapeWrap 21 (two component, super-fluid epoxy resin). MapeWrap G FIOCCO is a complete range of cord in unidirectional fibreglass. It is used for creating…
Fibreglass cord for impregnation with MapeWrap 21 (two component, super-fluid…
Carbon fibre cord for impregnation with MapeWrap 21 (two-component super-fluid epoxy resin). MapeWrap C FIOCCO is a complete range of cord in unidirectional carbon fibre with a high modulus of…
Carbon fibre cord for impregnation with MapeWrap 21 (two-component super-fluid…
Medium viscosity epoxy resin for impregnation of MapeWrap with “dry system” MapeWrap 31 SP is a gelatinous solvent-free epoxyresin based adhesive specially developed in the MAPEI research…
Medium viscosity epoxy resin for impregnation of MapeWrap with “dry system”…
High strength uni-directional continuous carbon fibre fabric with high and very high moduls of elasticity. MapeWrap C UNI-AX and MapeWrap C UNI-AX HM are uni-directional continuous carbon fibre…
High strength uni-directional continuous carbon fibre fabric with high and very…
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems.
Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for…
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN…
TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70…
-ltd-logos/mapei---header-logo.png?sfvrsn=31878676_6){kind=logo}
-ltd-logos/mapei-mobile-logo-266-x-62.png?sfvrsn=30878676_2){kind=logo}
