Products for Resilient, LVT and Textile Materials

Scroll Down

Skim Coating, Rapid Repair & Levelling Compounds

PLANITOP SMOOTH & REPAIR R4

(Distributed in New Zealand in original Italian packaging name - PLANITOP RASA & RIPARA R4) Quick-setting, fibre-reinforced, compensated-shrinkage, thixotropic cementitious mortar for repairing and…

(Distributed in New Zealand in original Italian packaging name - PLANITOP RASA…

ULTRAPLAN ECO

Ultra-fast hardening self-levelling smoothing compound with very low VOC content. Applications: Interior levelling of new and existing substrates, as long as not subject to moisture, to make them…

Ultra-fast hardening self-levelling smoothing compound with very low VOC…

Planiprep™ SC

High-Performance, Fiber-Reinforced Skimcoating Compound Planiprep SC is a high-performance, polymer-modified, fiber-reinforced cement-based skimcoating and patching compound. Use Planiprep SC to…

High-Performance, Fiber-Reinforced Skimcoating Compound Planiprep SC is a…

Mapecem® Quickpatch

High-Performance, High-Flow Concrete Patch Mapecem Quickpatch is a versatile, fast-setting, cementitious material used for the patching of interior/exterior concrete surfaces including concrete…

High-Performance, High-Flow Concrete Patch Mapecem Quickpatch is a versatile,…

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic binder for screeds. TECHNICAL DATA: Recommended mixing ratio: 200÷250 kg of TOPCEM with 1 m³ of aggregates (diameter from…

Special normal-setting, quick-drying (4 days), controlled-shrinkage hydraulic…

ULTRAPLAN RENOVATION

Fibre-reinforced levelling & smoothing compound suitable for application on multiple substrates applied 3 to 40mm thick. Particularly suitable for levelling off existing substrates, even wooden…

Fibre-reinforced levelling & smoothing compound suitable for application on…

FIBERPLAN

Fibre-reinforced ultra-fast hardening self-levelling smoothing compound. Applications: Interior levelling thicknesses from 3 to 10 mm of existing and new wooden floors, wooden boarding, chip-board…

Fibre-reinforced ultra-fast hardening self-levelling smoothing compound.…

NIVORAPID

Ultra-fast drying thixotropic cementitious levelling mortar, also suitable for vertical applications. Applications: Interior levelling of all types of substrates normally found in the building…

Ultra-fast drying thixotropic cementitious levelling mortar, also suitable for…

MAPECEM PRONTO

Pre-blended, ready-to-use, quick-setting and drying (24 hours), controlled-shrinkage mortar for screeds. TECHNICAL DATA: Mixing ratio: 1 25 kg bags of MAPECEM PRONTO with approximately 2.2 litres of…

Pre-blended, ready-to-use, quick-setting and drying (24 hours),…

MAPECEM

Special fast setting hydraulic binder for the preparation of rapid setting and drying (24 hours) screeds with controlled shrinkage. Applications: Formation of floating and bonded screeds on both…

Special fast setting hydraulic binder for the preparation of rapid setting and…

$LATEX PLUS$

LATEX PLUS

Latex admixture inducing elasticity to be mixed with Keraquick. Applications: Latex Plus is an admixture to be mixed with Keraquick. It improves deformability to meet the requirements of class S2…

Latex admixture inducing elasticity to be mixed with Keraquick. Applications:…

UC LEVELLER

Fast hardening levelling smoothing compound for thicknesses from 3 mm to 70 mm: especially recommended for pumping

Fast hardening levelling smoothing compound for thicknesses from 3 mm to 70 mm:…

PLANICRETE

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to improve mechanical and adhesive strength of cementitious mixes for screeds, renders, small-thickness renders, etc. Additive…

Synthetic-rubber latex for cementitious mixes. Applications: Admixture to…

Primers for Concrete & Timber Substrates

ECO PRIM GRIP

Ready-to-use bonding promoter and primer made from synthetic acrylic resin and silica inerts with a very low emission level of volatile organic compounds (VOC) for render, smoothing and levelling…

Ready-to-use bonding promoter and primer made from synthetic acrylic resin and…

ECO PRIM T PLUS

PRIMER Solvent free, low odour acrylic primer in water dispersion with very low emission of volatile organic compounds (VOC). TECHNICAL DATA: Consistency: liquid. Colour: light blue. Dilution rate:…

PRIMER Solvent free, low odour acrylic primer in water dispersion with very low…

MAPEPRIM SP

Two-component solvent-free primer. Applications: Treatment of gypsum and anhydrite surfaces before the installation of ceramic tiles or stone material with cementitious adhesives. Mapeprim SP…

Two-component solvent-free primer. Applications: Treatment of gypsum and…

Acoustic Insulation & Soundproofing

MAPESONIC CR

Soundproofing mat in sheets of rubber and cork applied on substrates before installing ceramic, stone, resilient and multi-layered wooden floors. TECHNICAL DATA: Thickness: 2 mm and 4 mm. Format: –…

Soundproofing mat in sheets of rubber and cork applied on substrates before…

Mapeguard™ 2

Premium Crack-Isolation and Sound-Reduction Sheet Membrane Mapeguard 2 is a next-generation, flexible thin, 40-mil lightweight, load-bearing, fabric-reinforced “peel-and-stick” crack-isolation…

Premium Crack-Isolation and Sound-Reduction Sheet Membrane Mapeguard 2 is a…

Moisture Barriers & Primers for Concrete Substrates

PRIMER MF

Two-component solvent-free epoxy primer to be used as an adhesion promoter for products from the Mapefloor range and to consolidate and waterproof cementitious substrates. Where to use: -…

Two-component solvent-free epoxy primer to be used as an adhesion promoter for…

PLANISEAL MR

Two component water based epoxy primer and moisture barrier suitable for green concrete and damp substrates TECHNICAL DATA: Consistency: liquid. Colour: light grey - semi gloss when dry, matt when…

Two component water based epoxy primer and moisture barrier suitable for green…

TRIBLOCK P

Three-component epoxy-cementitious primer for non-absorbent waterproofing damp substrates. TECHNICAL DATA: Consistency: comp. A liquid; comp. B liquid; comp. C powder. Colours: comp. A white; comp. B…

Three-component epoxy-cementitious primer for non-absorbent waterproofing damp…

Resilient & Textile Adhesives

ULTRABOND ECO MS 4 LVT WALL

LVT WALL ADHESIVE One-component, polymer-silylate adhesive for the installation of LVT on walls. TECHNICAL DATA: Consistency: creamy paste. Colour: ivory. Open time: 20-30 minutes. Ready for use: 24…

LVT WALL ADHESIVE One-component, polymer-silylate adhesive for the installation…

ULTRABOND ECO VS90 PLUS

Universal high temperature adhesive in water dispersion with very low emission level of volatile organic compounds for resilient floor coverings. TECHNICAL DATA: Consistency: creamy paste. Colour:…

Universal high temperature adhesive in water dispersion with very low emission…

ULTRABOND ECO V4 SP FIBER

Multi-purpose, acrylic adhesive in water dispersion with extended open time and very low emission level of volatile organic compounds (VOC) improved by adding fibres, particularly suitable for laying…

Multi-purpose, acrylic adhesive in water dispersion with extended open time and…

ULTRABOND ECO 170

Adhesive in water dispersion with a quick, strong initial bond and very low emission level of volatile organic compounds (VOC), specially formulated for textile flooring. TECHNICAL DATA: Consistency:…

Adhesive in water dispersion with a quick, strong initial bond and very low…

ULTRABOND ECO FIX

Adhesive in water dispersion which remains permanently tacky with very low emission level of volatile organic compounds (VOC), for self-laying flooring tiles. TECHNICAL DATA: Consistency: creamy…

Adhesive in water dispersion which remains permanently tacky with very low…

ULTRABOND ECO MS 4 LVT

ADHESIVE One-component, polymer-silylate adhesive for LVT. Particularly suitable for laying LVT and PVC in wet environments. TECHNICAL DATA: Consistency: creamy paste. Colour: ivory. Open time: 20-30…

ADHESIVE One-component, polymer-silylate adhesive for LVT. Particularly…

ULTRABOND ECO CONTACT

Solvent-free contact adhesive for resilient and textile floor and wall coverings. ULTRABOND ECO CONTACT is a contact adhesive which has to be applied on both the substrate and the back of the…

Solvent-free contact adhesive for resilient and textile floor and wall…

ADESILEX G19

Two-component epoxy-polyurethane adhesive. Where to use: Bonding of: - tile or sheet rubber flooring (with flat-back or canvas imprint or stalk back) for interiors and exteriors, subject to heavy and…

Two-component epoxy-polyurethane adhesive. Where to use: Bonding of: - tile or…

ADESILEX LP

Polychloroprenic double-buttering adhesive in solvent for laying profiles, covings and resilient floors and coverings where immediate setting is required. TECHNICAL DATA: Consistency: thick liquid.…

Polychloroprenic double-buttering adhesive in solvent for laying profiles,…

ULTRABOND ECO 380

Adhesive in water dispersion with a strong initial bond, long open time, for vinyl floors. TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 10-20 minutes. Open time:…

Adhesive in water dispersion with a strong initial bond, long open time, for…

ULTRABOND ECO TACK

Adhesive with permanent tack in water dispersion with a very low emission of volatile organic compounds for self-laying textile squares. TECHNICAL DATA: Consistency: liquid. Colour: light beige.…

Adhesive with permanent tack in water dispersion with a very low emission of…

ULTRABOND TX57

Adhesive with high rapid tack for laying textile and linoleum flooring. TECHNICAL DATA: Consistency: creamy paste. Colour: light beige. Waiting time: 0-20 minutes. Open time: 20-30 minutes. Set to…

Adhesive with high rapid tack for laying textile and linoleum flooring.…

Adesilex G19 Conductive

Two-component epoxy-polyurethane adhesive for conductive rubber and PVC flooring. Where to use: Bonding of conductive flooring in: - all areas where electrostatic charges may cause fire or disturb…

Two-component epoxy-polyurethane adhesive for conductive rubber and PVC…

Systems for Installation of Soft Covering, Vinyl, LVT, Textile and other Resilient Flooring

Get inspiration here for your next project

Show more

NZR16 - System for the Installation of LVT Over Acoustic Matting on a Concrete Substrate
Show more

NZR15 - FAST TRACK System for the Installation of Sheet Vinyl/LVT Over Engineered Screed
Show more

NZR14 - System for the Installation of Vinyl Sheet/LVT over Engineered Screed
Show more

NZR13 - System for Installing LVT Planks over Existing Ceramic Tiles
Show more

NZR12 - System for the Installation of Carpet Tiles on Uneven Concrete with High Residual Moisture
Show more

NZR11 - System for the Installation of Vinyl on Steps and Skirtings
Show more

NZR10 - System for the Installation of Vinyl Sheet on Floors in Wet Areas
Show more

NZR09 - System for the Installation of LVT over Timber or Particle Board Substrates
Show more

NZR08 - System for the Installation of Vinyl Sheet on Walls in Wet Areas
Show more

NZR07 - System for the Installation of Carpet Over a Concrete Substrate
Show more

NZR06 - System for the Installing Vinyl Floor Coverings Over Concrete with High Residual Moisture
Show more

NZR05 - System for the Installation of LVT Over Concrete with High Residual Moisture Content
Show more

NZR04 - System for the Installation of Loose Lay Vinyl Tiles/Planks
Show more

NZR03 - System for Installing Dual Bond Carpet Over a Concrete Substrate
Show more

NZR02 - System for the Installation of Carpet Over Existing Ceramic Tiles
Show more

NZR01 - System for the Fast Track Installation of LVT Planks

The best support for every type of floor

These floors are surfaces exposed to intense traffic and constant use such as in hospitals, schools, airports, offices, shops and industrial environments. Various factors have to be carefully analysed (moisture content, the flatness and evenness of the substrate, etc.) to guarantee durability and maximum performance.

This line of products includes adhesives, smoothing and levelling compounds and primers for installing resilient and acrylic and polyurethane resin flooring.