tx

Products for textiles

Only by Mapei, the complete and innovative systems for laying textiles

Mapei, has always had a keen eye on the requirements of new design trends and proposes a new lines of highly technological, reliable and professional products dedicated to the laying of these types of floorings and coverings.
6510-ultrabond-eco-tx3b973ed7879c562e49128ff01007028e9

Ultrabond Eco TX3

Excellent wet grab “premium” adhesive with early build up
of strength for textile and linoleum floorings.

Excellent wet grab adhesive with early build up of a tough strength, suitable for bonding needle punched and textile floors with all types of backing materials onto all kinds of standard substrates, even heating systems, and on acoustic mats too. Also suitable for laying linoleum. Particularly suitable in commercial and public areas, where floors are subject even to heavy traffic (hotels, auditoriums, airports, libraries, restaurants, offices, etc.).

TEXTILES, LINOLEUM

MAPEI N. 2, 3, TKB B1, B2

FLOOR, WALL


PRODUCT PROPERTIES

• High wet grab 
• Fast development of set 
• Quick leg development 
• High and though final strength 
• Exposure to castor wheels in accordance with EN 12529 
• Emicode EC1 PLUS (very low emission) 
• Blauer Engel DE-UZ 113 
• M1 certified 
• Low odour (ISO 16000-28) 
• Suitable for marine equipment (in compliance with Marine Equipment Directive - MED)

6510-ultrabond-eco-tx3b973ed7879c562e49128ff01007028e9

Ultrabond Eco TX2

"Professional" adhesive, with high initial grab
and long open time for textile floorings.

High initial grab and long open time adhesive, suitable for bonding needle-punches and textile floor coverings with all types of backing materials, onto all kinds of absorbent standard substrates, even heating systems, and on acoustic mats too. The long open time makes it easier the installation of patterned carpet. Suitable for static and dynamic loads in residential and commercial areas (offices, hotels, auditoriums, libraries, restaurants, airports, etc.).

TEXTILES


MAPEI N. 2, 3, TKB B1, B2

FLOOR



PRODUCT PROPERTIES

• Very easy to apply
• Excellent wetting
• High initial grab
• Long open time
• High and tough final strength
• Exposure to castor wheels in accordance with EN 12529
• Emicode EC1 Plus (very low emission)
• Blauer Engel DE-UZ 113 
• Suitable for marine equipment (in compliance with Marine Equipment Directive - MED)

6510-ultrabond-eco-tx3b973ed7879c562e49128ff01007028e9

Ultrabond TX57

High and fast initial grab adhesive for textile and linoleum floorings.

Excellent wet grab adhesive with early build up of a tough strength, suitable for bonding needle punched and textile floors with all types of backing materials onto all kinds of standard substrates, even heating systems. Also suitable for laying linoleum. Suitable for static and dynamic loads in residential and commercial areas (offices, hotels, auditoriums, libraries, restaurants, airports, etc); particularly suitable in winter seasons on inadequately heated building sites.

TEXTILES, LINOLEUM

MAPEI N. 2, 3, TKB B1, B2

FLOOR



PRODUCT PROPERTIES

• Very easy to apply
• Excellent wetting
• High wet grab
• Fast development of set also at lower temperatures
• Quick leg development
• High and tough final strength
• Exposure to castor wheels in accordance with EN 12529

6510-ultrabond-eco-tx3b973ed7879c562e49128ff01007028e9

Ultrabond Eco Tack TX+

Carpet tile tackifier.

Acrylic-based adhesive designed to provide a permanently tacky film when dry, to allow the removal and replacement of carpet tiles when required, onto all kinds of standard substrates, smoothing compounds, existing floor coverings and raised access floor panels. Also suitable for fixing carpet pads and loose-lay LVT.

TEXTILES, LINOLEUM

MAPEI N. 2, 3, TKB B1, B2

FLOOR



PRODUCT PROPERTIES

• Very easy to apply by roller
• Very low consumption
• Fast drying
• Easy removal or replacement of individual, damaged or worn tiles and coverings
• Exposure to castor wheels in accordance with EN 12529
• Emicode EC1 Plus (very low emission)
• Blauer Engel DE-UZ 113
• M1 certified
• Low odour (ISO 16000-28)
• Suitable for marine equipment (in compliance with Marine Equipment Directive - MED)

6510-ultrabond-eco-tx3b973ed7879c562e49128ff01007028e9

Ultrabond Eco Tack TX+

Carpet tile tackifier.

Acrylic-based adhesive designed to provide a permanently tacky film when dry, to allow the removal and replacement of carpet tiles when required, onto all kinds of standard substrates, smoothing compounds, existing floor coverings and raised access floor panels. Also suitable for fixing carpet pads and loose-lay LVT.

CARPET TILES, LOOSE-LAY LVT

ROLLER


FLOOR, WALL


PRODUCT PROPERTIES

• Very easy to apply by roller
• Very low consumption
• Fast drying
• Easy removal or replacement of individual, damaged or worn tiles and coverings
• Exposure to castor wheels in accordance with EN 12529
• Emicode EC1 Plus (very low emission)
• Blauer Engel DE-UZ 113
• M1 certified
• Low odour (ISO 16000-28)
• Suitable for marine equipment (in compliance with Marine Equipment Directive - MED)

Product documentation