Products
Back

System for protecting existing buildings in the event of earthquakes by applying an elastomeric finish on façade walls

Old Building
External walls
Structural strengthening

Products

1
Render with removal of existing paint
2
One-component ready-mixed waterbased adhesive in polyurethane dispersion MAPEWRAP EQ ADHESIVE
Apply a first, even layer with a brush or roller. Please refer to the MAPEWRAP EQ SYSTEM data sheet.
3
Primed bi-directional glass fibre fabric MAPEWRAP EQ NET and second coat of adhesive MAPEWRAP EQ ADHESIVE
Immediately apply the special fabric and spread and flatten it out by hand (wear protective waterproof rubber gloves when carrying out this operation), making sure there are no folds or creases, then go over the surface several times with a MAPEWRAP ROLLER so that the adhesive completely penetrates into the fibres of the fabric.
Apply a second coat of adhesive with a brush or roller while the first layer is still fresh.
Please refer to the MAPEWRAP EQ SSYSTEM data sheet.
4
Cementitious skimming mortar
Apply and spread the skimming mortar with a smooth metal trowel.
5
Acrylic primer
Apply the product with a brush or roller to even out the surface and to promote adhesion of the successive coat of paint.
6
Hygienising, crack-bridging elastomeric paint
Once the primer is dry, apply at least 2 coats of paint with a brush, roller or by spray to completely cover the surface.
You may be interested in Bonus Casa Facciate Structural strengthening
NOT REMOVE

Keep in touch

Subscribe to our newsletter to get Mapei news

SUBSCRIBE
SUBSCRIBE