Products
Back

Rapid system consisting of an ultra-thin skim coat and wall finishing to prevent rubble/debris falling from internal stud walls and façade infills complete with levelling and wall finish

Old Building
Internal walls
Structural strengthening

MAPEWRAP EQ SYSTEM + GAMMA MAPEGROUT + PLANITOP 200 + GAMMA DURSILITE

Products

1
Render with removal of existing paint
2
Ready-to-use, water-based, one-component adhesive in polyurethane dispersion MAPEWRAP EQ ADHESIVE
Apply a first, even layer with a brush or roller.
Please refer to the MAPEWRAP EQ SYSTEM data sheet.
3
Primed glass-fibre bi-directional fabric MAPEWRAP EQ NET and second coat of adhesive MAPEWRAP EQ ADHESIVE
Immediately apply the special fabric and spread and flatten it out by hand (wear protective waterproof rubber gloves when carrying out this operation), making sure there are no folds or creases, then go over the surface several times with a MAPEWRAP ROLLER so that the adhesive completely penetrates into the fibres of the fabric.
Apply a second layer of adhesive with a brush or roller while the first layer is still fresh.
Please refer to the MAPEWRAP EQ SYSTEM data sheet.
4
Cementitious skimming mortar
Apply and spread the skimming mortar with a smooth metal trowel.
5
Acrylic primer
Apply the product with a brush or roller to even out the surface and to promote adhesion of the successive coat of paint.
6
Washable, hiding, water-based wall paint
Once the primer is dry, apply at least 2 coats of paint with a brush or roller to completely cover the surface.
You may be interested in TRAVI E PILASTRIE Pareti Interne Bonus Casa Sismabonus Structural strengthening
NOT REMOVE

Keep in touch

Subscribe to our newsletter to get Mapei news

SUBSCRIBE
SUBSCRIBE