MAPESTONE TFB CALCIX

Pre-blended, cement-free, lime-based mortar with high recycled material content for installation beds for stone pavements, piazzas and roads not used by heavy traffic, including those of historical interest.

IDEAL FOR PEDESTRIAN AND LIGHT VEHICLE TRAFFIC

MADE FROM NATURAL HYDRAULIC LIME (NHL), ZERO CEMENT CONTENT

SUITABLE FOR AREAS HIGHLY SATURATED WITH WATER

LOW ENVIRONMENTAL IMPACT THANKS TO ITS HIGH RECYCLED MATERIAL CONTENT

MAPESTONE CALCIX is a cement-free system specific for refurbishing and restoring stone paving, including of historical interest.

MAPESTONE TFB CALCIX is recommended for installing decorative stone paving used by light vehicle traffic.

 Used in combination with MAPESTONE PFS CALCIX it can be used to create durable, class P4, P5, P6 and P7 decorative stone paving in compliance with UNI 11714-1:2018, including in areas highly saturated with water.

 Both types of MAPESTONE CALCIX PFS are available in either a light colour or in a dark grey Tenebris version.

MAPESTONE TFB CALCIX

Pre-blended cement-free mortar made from lime with good mechanical properties and resistance to freezing weather specific for installing class P4, P5, P6 and P7 decorative stone paving, including of historical interest, compliant with UNI 11714-1:2018 standard for use by pedestrians and light vehicles

ADVANTAGES:

  • Made from natural hydraulic lime (NHL), zero cement content
  • Ideal for pedestrian and light vehicle traffic
  • Low environmental impact thanks to its high recycled material content
  • Suitable for areas highly saturated with water

Mixing ratio: 100 parts of Mapestone TFB Calcix with 14 parts of
water to obtain a no-slump consistency and 15 parts
of water to obtain a plastic consistency
Consistency of mix: plastic
Bulk density of wet mortar (kg/m³) (EN 1015-6): 2000
Workability time of wet mortar (EN 1015-9): approx. 60 min.
Minimum applicable thickness (mm): 30
Compressive strength after 28 days (MPa)
(EN 1015-11): 18
Adhesive strength on concrete (MPa) (EN 1015-12): 0.5
Static modulus of elasticity after 28 days (GPa)
(EN 13412): 10
Water absorption due to capillary action
[kg/(m²·min0.5)] (EN 1015-18): < 0.2
Water vapour permeability (μ) (EN 1015-19:) 60

Related documentation

Technical data sheet
Download
Safety Data Sheet
Download

Related Products

Keep in touch

Subscribe to our newsletter to get Mapei news