One component, shrinkage-compensated, sulphate-resistant, thixotropic, inorganic fibre-reinforced mortar, for repairing concrete structures where higher ductility is required. Mapegrout Easy Flow GF is used for repairing deteriorated concrete structures such as pillars, the inside face of road and railway viaducts, hydraulic works such as canals, dam walls, overflow channels, cleaning basins and tanks, concrete industrial floors and access ramps. Mapegrout Easy Flow GF mixed with 15.5-16.5 of water and 0.25% of Mapecure SRA is particularly suitable for spray application and whenever easy pumping over long distances and to elevated positions is required. The product may be used without adding Mapecure SRA, when environmental conditions permit excellent curing. Thanks to its highly thixotropic properties, Mapegrout Easy Flow GF may be applied mechanically or by hand on vertical surfaces, even in thick layers without the use of formwork. Maximum recommended thickness per layer is 50 mm. Mapegrout Easy Flow GF meets the minimum requirements of EN 1504-3 standards for R4-class structural mortar.
Consumption 18.5 kg/m² per cm of thickness.
Packaging 25 kg vacuum-sealed polyethylene bags; 1500 kg big-bags.