Planitop HPC Floor

The compact and quick certified solution for strengthening floors

NO REINFORCEMENT REQUIRED

COMPACT

EXCELLENT MECHANICAL PROPERTIES

QUICK AND SIMPLE APPLICATION

PLANITOP HPC FLOOR is an FRC (Fibre Reinforced Concrete) technology structural mortar containing steel reinforcing fibres with extra-high mechanical properties for strengthening the extrados of floors by applying a compact structural screed without the need for additional strengthening mesh. In the presence of an existing screed, using PLANITOP HPC FLOOR also means there is no need to embed dolly bars into the underlying floor joists.

PLANITOP HPC FLOOR comes with CVT (Technical Evaluation Certificate) certification for structural applications, issued by the Technical Commission of Italy’s Department of Public Works. 

PLANITOP HPC FLOOR may be used for various types of floor salb (brick/cement, reinforced concrete, wood, mixed brick/beam, etc.).

 

The PLANITOP HPC family of products is made up of a range of structural mortars, known also as “microconcrete”, with very high mechanical properties (High Performance Concrete), and contain structural steel strengthening fibres specifically developed for application in compact layers to strengthen reinforced concrete structures. Thanks to the structural fibres contained in the mortar, this family of products is part of the FRC (Fibre Reinforced Concrete) technology range.

The PLANITOP HPC family of products are characterised in particular for the following:
• high performance properties
• fibre-reinforced with structural steel fibres (except PLANITOP HPC LV)
• may be applied without the need for additional reinforcement
• applied in compact layers
• simple to use
• different consistencies available (plastic, semi-plastic, thixotropic), according to specific project requirements

 

PLANITOP HPC FLOOR

Fibre-reinforced, shrinkage-compensated, high-strength, high-ductility, highly-fluid cementitious mortar.

Related documentation

Technical data sheet
Download
Safety Data Sheet
Download
Declaration of performance
Download
EPD
Download
P.A.S.S.
Download

Product documentation

Main Benefits

MAXIMUM GUARANTEE

Planitop HPC Floor is CVT-certified as FRC for structural applications. It also complies with the principles defined in EN 1504-9 and with the requirements of EN 1504-3 and EN 1504-6.

RESISTANT TO ABRASION AND IMPACT LOADS

High resistance to wear from abrasion and impact loads.

EXCELLENT MECHANICAL PROPERTIES

Extra-high compressive and flexural strength.

QUICK AND SIMPLE APPLICATION

The high level of plasticity of the mortar and the fact there is no need to prepare any rebar considerably reduce application times and costs.

NO REINFORCEMENT REQUIRED

Thanks to the steel fibres contained in the product, Planitop HPC Floor does not require any additional reinforcement. The specific mix developed by the Mapei Laboratories gives the product a high level of adhesion to concrete substrates, thereby eliminating the need for connectors.

COMPACT

Less impact on overall mass and lower additional load on the structure. Less invasive: applied in layers from just 1.5 to 3 cm thick.

Last Projects PLANITOP HPC FLOOR

Planitop HPC family of Products

Associated products

PRIMER 3296
PRIMER 3296
Acrylic primer in water dispersion with high penetration, consolidating and anti-dust properties for screeds. TECHNICAL DATA: Consistency:…
MAPEI STEEL DRY 316
MAPEI STEEL DRY 316
Ultra high-strength “dry-applied” helical AISI 316 stainless steel bars for strengthening reinforced concrete, masonry and wooden…