Video Tutorials & Information Materials | Mapei

All Video Tutorials

1 - 3 of 42

All Video Tutorials

Mapei best reference projects 2010

Our best reference projects worldwide.

Structural strengthening, All Video Tutorials

Featured Products

PLANITOP HPC FLOOR

Fibre-reinforced, shrinkage-compensated, high-strength, high-ductility, highly-fluid cementitious mortar.

Waterproofing, All Video Tutorials

Mapelastic - The waterproofer for balconies and terraces

ADESILEX P4

MAPELASTIC

MAPEBAND

+ 5

Show products

Featured Products

High-performance, self-buttering, quick-setting grey cementitious adhesive for ceramic tiles and stone material. N.B. May also be used for smoothing internal and external surfaces. TECHNICAL DATA: Where to use: floors only. Pot life of mix: more than 60 minutes. Open time: 20 minutes. Waiting time before grouting: 4 hours. Set to light foot traffic: approx. 4 hours. Ready for use: approx. 24 hours. Colour: grey. Application: N° 6 or 10 notched rounded trowel. EMICODE: EC1 Plus - very low emission. Storage: 12 months. Consumption: 4-10 kg/m². Packaging: 25 kg bags.

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

MAPEBAND

Alkali-resistant rubber tape with felt for cementitious waterproofing systems and liquid sheaths. TECHNICAL DATA: In service temperature range: from -30°C to +60°C. EMICODE: EC1 Plus - very low emission. Packaging: – 120 mmx50 m rolls; – 120 mmx10 m rolls; – 90° and 270° angular pieces; – gaskets for outlets, sizes 120x120 mm and 400x400 mm; – special cross and T pieces.

MAPENET 150

Alkali-resistant glass fibre mesh (in compliance with the ETAG 004 guide) for reinforcing protective waterproofing layers, anti-fracture membranes and thermal insulation systems. TECHNICAL DATA: Colour: blue. Weight: 150 g/m² ± 5%. Mesh size: 4x4.5 mm. Storage: unlimited. Packaging: 50 m x 1 m rolls.

DRAIN VERTICAL DRAIN LATERAL

Kit for installing floor drains, ideal for draining off water from terraces, balconies, bathrooms, boiler rooms, wash-rooms, etc. TECHNICAL DATA: Diameter: 50, 70 and 100 mm. Packaging: 1 kg kits including: – vertical or lateral polypropylene drain-pipe available in 3 diameters (50, 75 and 90 mm) for DRAIN LATERAL and 5 diameters (50-75-82-90-100 mm) for DRAIN VERTICAL, with a welded 400x400 mm polypropylene drain-cover; – telescopic extension; – “anti-odour” plug; – removable stainless steel grate.

PLANITOP RASA & RIPARA

Quick-setting, fibre-reinforced, compensated-shrinkage, thixotropic cementitious mortar for repairing and smoothing concrete, applied in various thicknesses of from 3 to 40 mm in a single layer.

ULTRACOLOR PLUS

High-performance, anti-efflorescence, quick-setting and drying polymer-modified mortar with water-repellent DropEffect ® and mould-resistant BioBlock ® technology for grouting joints up to 20 mm wide.

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Show all

Cleaning - Mantaining - Protection

1 - 3 of 7

Cleaning - Mantaining - Protection

Ultracare Stain Protector W Plus - Water-based protector

ULTRACARE STAIN PROTECTOR W PLUS

Show products

Featured Products

ULTRACARE STAIN PROTECTOR W PLUS

Water-based, natural effect polymer emulsion with protective and stain-resistant properties

All Video Tutorials, Cleaning - Mantaining - Protection

Ultracare Grout Release - Pre-grouting protection

ULTRACARE GROUT RELEASE

Show products

Featured Products

ULTRACARE GROUT RELEASE

Product in water dispersion for pre-grouting protection of porous materials

All Video Tutorials, Cleaning - Mantaining - Protection

Ultracare Intensifier S - Solvent-based impregnator

ULTRACARE INTENSIFIER S

Show products

Featured Products

ULTRACARE INTENSIFIER S

Solvent-based blend of polymers with high penetration capacity, for a colour enhancing and protective effect

Show all

Concrete surfaces

1 - 1 of 1

Concrete surfaces, All Video Tutorials

Color Paving

Redipuglia War Memorial Rogliano di Redipuglia (GO) – Italy Mapei Color Paving® renovation of architectural…

MAPESTONE PFS 2

PLANICRETE

COLOR PAVING ADMIX

+ 2

Show products

Featured Products

MAPESTONE PFS 2

Pre-blended mortar for grouting architectonic stone floors with exceptional physical-chemical characteristics suitable for areas exposed to dry/damp cycles specified by exposure class XF4, with high compressive strength and good resistance to de-icing salts, freeze-thaw cycles and seawater. In compliance with UNI 11714-1:2018 standard TECHNICAL DATA: Pot life of mix: 20 minutes. Waiting time before putting into service: 7 days. Colour: basic and Dark Grey. Application: rubber MAPEI trowel or rake. Cleaning: wet sponge and then light, steady jet of water or with a suitable cleaning machine. Storage: 12 months. Consumption: according to the size of the joints slabs and stone. Packaging: 25 kg bag.

PLANICRETE

Synthetic rubber latex to improve adhesion and performances of cement mixes and prepare bonding slurries for screeds. TECHNICAL DATA: Consistency: fluid liquid. Dry solids content: 36%. Storage: 24 months. Consumption: – for adhesive slurry: 100-150 g/m²; – to prepare screeds and render: 50-80 kg/m³. Packaging: 5, 10 and 25 kg tanks and 12x1 kg packages.

COLOR PAVING ADMIX

Ready-mixed multi-purpose powdered admixture for exposed-finish architectural floors and surfaces. TECHNICAL DATA: Colours: neutral, red, sand, yellow. Dosage: 25 kg/m³ of concrete. Packaging: paper bag containing 2 x 12.5 kg water-soluble bags.

MAPEWASH PO

Biodegradable vegetable oil-based surface set retardant with a curing effect to create architectural floors and surfaces. TECHNICAL DATA: Colour: according to the type of product: green, blue, purple, yellow, pink, grey. Yield: by spray 3.5-4 m²/l. Packaging: 2 and 22 litre cans.

COLOR PAVING BINDER

Ready-mixed ready to use screed supplied in big-bags for creating architectural road surfaces in exposed aggregate concrete. TECHNICAL DATA: Colours: neutral, red, sand, yellow. Packaging: 970 kg big-bags.

Show all

Grouting

1 - 1 of 1

Grouting, All Video Tutorials

Kerapoxy Design

Decorative, translucent, acid resistant mortar ideal for glass mosaic

Show all

Installation of ceramics

1 - 3 of 7

Installation of ceramics, All Video Tutorials

Mapei Keraflex S1 Zero - Zero Impact

KERAFLEX MAXI S1 ZERØ

Show products

Featured Products

KERAFLEX MAXI S1 ZERØ

High-performance cementitious grey adhesive with no vertical slip, with Low Dust technology, extended open time and deformable with excellent workability. Suitable for laying large-sized ceramic tiles and stone material, with very low emission level of volatile organic compounds and offset residual greenhouse gas emissions. Suitable for high thickness adhesives up to 15 mm.

Installation of ceramics, All Video Tutorials

Keraquick Maxi S1 Marble installation

Perfect installation of natural stone sensitive to moisture and streaks

KERAQUICK MAXI S1

Show products

Featured Products

KERAQUICK MAXI S1

High-performance, deformable, rapid-setting and hydrating, non-slip cementitious adhesive with very low emission of volatile organic compounds for ceramic tiles and in particular for stone, including large formats. Suitable for application in layers up to 15 mm thick.

Installation of ceramics, All Video Tutorials

Keraquick Maxi S1: Ceramic installation

Rapid ceramic installation even when a thick layer of adhesive is required

KERAQUICK MAXI S1

Show products

Featured Products

KERAQUICK MAXI S1

Show all

Restoration

1 - 3 of 8

Waterproofing, Sealing and bonding, All Video Tutorials, Restoration

Repair work on a road viaduct

This video illustrates a series of systems offered by Mapei to carry out long-lasting repair work on road…

ADESILEX PG4

MAPECURE CA

MAPEGROUT EASY FLOW

+ 17

Show products

Featured Products

ADESILEX PG4

Two-component, thixotropic epoxy adhesive with modified rheology for bonding MAPEBAND, MAPEBAND TPE, PVC strips and Hypalon and for structural bonds. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 3 : 1. Pot life of mix: 70 minutes (at +23°C). Minimum applicable thickness: 1-2 mm. Maximum applicable thickness: 1 cm per layer. Classification: EN 1504-4. Storage: 24 months. Application: trowel. Consumption: 1.60-1.65 kg/m² per mm of thickness. Packaging: 2 kg kits: – 1.5 kg drums (comp. A); – 0.5 kg drums (comp. B). 6 kg kits: – 4.5 kg drums (comp. A); – 1.5 kg drums (comp. B). 30 kg kits: – 22.5 kg drums (comp. A); – 7.5 kg drums (comp. B).

MAPECURE CA

Paintable, film-forming, light-coloured acrylic curing agent in solvent for mortar and concrete. TECHNICAL DATA: Application: roller or spray. Consumption: 0.11-0.15 kg/m². Packaging: 10 kg tanks.

MAPEGROUT EASY FLOW

One-component, fibre-reinforced, compensated-shrinkage, sulphate-resistant thixotropic mortar, particularly suitable for repairing concrete structures with a rendering machine. Mapegrout Easy-Flow is used for repairing deteriorated concrete structures. The product is particularly suitable when easy pumping over long distances and too elevated positions is required. Repairs carried out by spraying on viaduct piles, bearing walls in tunnels, road and railway tunnels, prefabricated structures, hydraulic works such as canals, dams, spillways and basins and structures deteriorated by the presence of sulphate salts in water or in the ground. In order to guarantee that its expansive properties develop correctly when cured in the open air, adding 0.25% of Mapecure SRA special curing agent to Mapegrout Easy Flow offers a number of advantages. The product may also be used without adding Mapecure SRA, in those cases where the climatic conditions allow for a favourable curing cycle. Mapegrout Easy Flow is usually applied by spray, but may also be applied with a trowel on vertical surfaces without using formwork. The maximum thickness to be applied for each layer is approximately 100 mm. Mapegrout Easy Flow meets the minimum requirements of EN 1504-3 for class R4 structural mortar. Consumption 18.5 kg/m² per cm of thickness. Packaging 25 kg vacuum-packed polyethylene bags; 1500 kg big-bags.

MAPEBAND TPE

TPE tape for flexible sealing and waterproofing of expansion joints and cracks subject to movement. TECHNICAL DATA: Sizes available: – 17 cm (MAPEBAND TPE 170); – 32.5 cm (MAPEBAND TPE 325). Width of expanding zone: – MAPEBAND TPE 170: 50 mm; – MAPEBAND TPE 325: 165 mm. Thickness: 1.2 mm. Maximum elongation of expanding zone: – 5 mm (MAPEBAND TPE 170); – 10 mm (MAPEBAND TPE 325). Packaging: – 30 m rolls (both 170 and 325 width versions); – special cross and T pieces (both 170 and 325 width versions).

PRIMER SN

Two-component epoxy primer with fillers. May be coloured with MAPECOLOR PASTE. TECHNICAL DATA: Mixing ratio: component A : component B = 80 : 20. Colour of mix: neutral. Consistency of the mix: viscous fluid. Density of mix (kg/m³): 1500. Viscosity of the mix (mPa·s): 1,100 ± 100 (# 3 - rpm 50). Pot life: 30 min. Application temperature range: from +8°C to +35°C. Dust dry at +23°C and 50% R.H.: 6 hours. Set to light foot traffic at +23°C and 50% R.H.: 24 hours. Final setting time: 7 days. Storage: 24 months in its original sealed packaging. Application: flat American trowel or smooth trowel. Consumption: 0.3-0.7 kg/m² per coat, depending on the absorbency and characteristics of the substrate. Packaging: 20 kg kits (A+B); 5 kg kits (A+B).

MAPESHIELD I

Pure zinc anodes coated with a special conductive paste, for galvanic cathodic protection against corrosion of steel reinforcement in new structures and in structures requiring repair. TECHNICAL DATA: Mapeshield I 10 10/10 10/20 External surface: 100 x 50 mm ± 10% 100 x 50 mm ± 10% Height: 12 mm ± 10% 15 mm ± 10% Weight: 230 g ± 10% 320 g ± 10% Storage: 12 months. Application: directly on steel reinforcement. Consumption: according to the density of steel reinforcement. Packaging: boxes of 24 pieces. Mapeshield I 30 30/10 30/20 External surface: 300 x 50 mm ± 5% 300 x 50 mm ± 5% Height: 10 mm ± 10% 12 mm ± 10% Weight: 450 g ± 10% 570 g ± 10% Storage: 12 months. Application: directly on steel reinforcement. Consumption: according to the density of steel reinforcement. Packaging: boxes of 12 pieces.

MAPEFLEX PU65

Two-component, castable polyurethane sealant for sealing joints in roads up to surface level, mixed with QUARTZ 0.5 sand at a ratio of up to 1:1 by weight. Setting and hardening may be accelerated by adding a specific liquid accelerator MAPEFLEX PU65 CATALYST. TECHNICAL DATA: Shore A hardness: 80. Workability time: 2-3 hours. Colour: black. Application: by pouring. Consumption: 1.2 kg/linear metres (10x10 mm section). Packaging: 10 kg drums (A+B).

MAPELASTIC GUARD

Two-component, elastic cementitious mortar for protecting large concrete structures subjected to high stress. TECHNICAL DATA: Mixing ratio: 3 parts of MAPELASTIC GUARD comp. A with 1 part of MAPELASTIC GUARD comp. B. Pot life of mix: approximately 1 h (at +20°C). Minimum applicable thickness: 2 mm per layer. Classification: EN 1504-2 - coating (C) principles PI, MC and IR. Storage: 12 months (comp. A); 24 months (comp. B). Application: trowel or by spray with a rendering machine. Consumption: – approximately 1.7 kg/m² per mm of thickness (by trowel). – approximately 2.2 kg/m² per mm of thickness (by spray). Packaging: 32 kg kits: – 24 kg bags (comp. A); – 8 kg tanks (comp. B).

MAPEGROUT BETONTECH HPC

Free-flowing, shrinkage compensated cementitious grout with added polymer fibre reinforcement with a work-hardening effect for restoring concrete requiring a high level of ductility. TECHNICAL DATA: Maximum size of aggregate: 6 mm. Mixing ratio: 100 parts of MAPEGROUT BETONTECH HPC with 11.5-12.5 parts of water and 0.25% of MAPECURE SRA. Pot life of mix: approx. 1 hour (at +20°C). Minimum applicable thickness: 3 cm. Maximum applicable thickness: 10 cm. Classification: EN 1504-3 - class R4 structural mortar. Storage: 12 months. Application: pouring into formwork. Consumption: approx. 20.5 kg/m² per cm of thickness. Packaging: 25 kg vacuum-packed polyethylene bags and 1,000 kg big-bags.

PRIMER RM

Two-component fillerized epoxy primer for treating the surface of concrete before applying epoxy mortar. TECHNICAL DATA: Mixing ratio: comp A : comp. B = 60 : 40. Consistency of mix: fluid. Pot life of mix: approx. 30 mins. (at +23°C). Storage: 12 months. Application: spreader, brush or roller. Consumption: approx. 450 g/m² depending on the absorbency of the substrate. Packaging: 2 kg kit: – 1.2 kg tub (comp. A); – 0.8 kg canister (comp. B).

PLASTIMUL

Bitumen waterproofing emulsion for general purpose use. TECHNICAL DATA: Consistency: thick paste. Density: 1.2 g/cm³. pH: 10. Dry solids content: approx. 76%. Storage: 12 months. Minimum application temperature: +5°C. Consumption: approx. 1.7 kg/m² per mm of dry product depending on the substrate. Packaging: 12 and 30 kg drums.

PURTOP 400 M

Two-component, solvent-free, spray applied, hybrid polyurea membrane applied in sito using a high-pressure, bi-mixer type pump to form waterproof coatings on bridge decks and flat roofs. TECHNICAL DATA: A/B ratio (by volume): 100/100. Classification: EN 1504-2. Application: by spray with a high-pressure bi-mixer pump. Consumption: 2.2 kg/m² per 2 mm of thickness. Packaging: – component A: 220 kg drums; – component B: 225 kg drums.

PLANIGROUT 300

Three-component fluid epoxy mortar for anchorage work. TECHNICAL DATA: Maximum dimension of aggregate: 2 mm. Mixing ratio: comp. A : comp. B : comp. C = 16 : 6 : 100. Pot life of mix: 1 hour (at 23°C). Maximum applicable thickness: 5 cm per layer. Classification: EN 1504-6. Storage: 12 months. Application: pouring. Consumption: 2 kg/m² per mm of thickness. Packaging: 12.2 kg kits: – 1.6 kg drums (comp. A); – 0.6 kg drums (comp. B); – 10 kg bags (comp. C). 36.6 kg units: – 4.8 kg drums (comp. A); – 1.8 kg drums (comp. B); – 30 kg bags (comp. C).

EPOJET

Two-component, super-fluid epoxy resin for injections and anchorings. TECHNICAL DATA: Mixing ratio: comp. A : comp. B = 4 : 1. Pot life of mix: 40 minutes (at +23°C). Classification: EN 1504-5 and EN 1504-6. Storage: 24 months. Application: injection or pouring. Consumption: – sealing cracks: 1.1 kg/l of cavities to be filled; – bonding concrete to steel: 1.1 kg/m² per mm of thickness. Packaging: 2.5 kg kits: – 2 kg drums (comp. A); – 0.5 kg bottles (comp. B). 4 kg kits: – 3.2 kg drums (comp. A); – 0.8 kg bottles (comp. B).

MAPEFLOOR I 900

Two-component epoxy binder used for preparing trowelled mortar with a damp earth consistency for industrial floors. TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 100 : 50. Colour of mix: transparent amber. Consistency of mix: viscous fluid. Dust dry at +23°C and 50% R.H.: 2-4 hours. Set to light foot traffic at +23°C and 50% R.H.: 12 hours. Final hardening time: 7 days. Storage: 12 months in its original sealed packaging. Application: – as bonding promoter: roller or smooth trowel; – for mortar: rake and aluminium straight edge. Consumption: – as bonding promoter: 0.5-0.7 kg/m²; – for mortar: recommended ratio for mortar: 1 kg of MAPEFLOOR I 900 (A+B) per 8-13 kg of QUARTZ 1.9, consumption depends on the thickness to be applied. Packaging: 15 kg kits (A + B).

PLANIBOND BA 100

Two-component fluid epoxy resin for anchoring steel bars. TECHNICAL DATA: Mixing ratio: comp. A: comp. B = 90 : 10 by weight. Pot life of mix: 30 mins. (at +23°C). Classification: EN 1504-6. Storage: 24 months. Application: by pouring. Consumption: approx. 2 kg/dm³. Packaging: 3 kg kit (A+B): – component A= 2.7 kg – component B= 0.3 kg

PURTOP PRIMER BLACK

One-component solvent primer, specific for improving adhesion of asphalt flooring on surfaces waterproofed with products from the PURTOP range. TECHNICAL DATA: Consistency: liquid. Colours: black. Application temperature range: from +5°C to +35°C. Hardening time: 1-3 hours.

MAPESIL BM

Neutral silicone sealant for metal-work for movements up to 25%. TECHNICAL DATA: Movement in service: 25%. Modulus of elasticity at 100% elongation: 0.35 N/mm². Shore A hardness: 25. Workability time: 15 minutes. Colours: transparent, grey, copper and dark brown. EMICODE: EC1 Plus - very low emission. Application: extrusion gun. Consumption: 3.1 linear metres per 310 ml cartridge (10x10 mm section). Packaging: 310 ml cartridges.

MAPEFIX VE SF

Styrene-free, hybrid vinyl resin-based chemical anchor for structural loads. Certified for threaded bar, construction bars and C1 seismic loads.

MAPEFLOOR EP 90

Three-component high performance epoxy screed consistency mortar for repairing concrete flooring and forming support layers for beams and joints. TECHNICAL DATA: Mixing ratio: comp A : comp. B : comp. C = 1.95 : 0.8 : 24 by weight. Consistency of mix: screed consistency. Pot life of mix: approx. 50 minutes (at +23°C). Minimum applicable thickness: 5 mm. Maximum applicable thickness: 5 cm per layer. Classification: – EN 1504-3 - class R4 structural mortar; – EN 13813 - synthetic resin screed materials. Storage: 24 months. Application: trowel. Consumption: approx. 20 kg/m² per cm of thickness. Packaging: 26.75 kg kit: – 1.95 kg canister (comp. A); – 0.80 kg canister (comp. B); – 24 kg vacuum-packed polyethylene sack (comp. C).

Restoration, All Video Tutorials

Mapegrout 430 | Restoration of a concrete pillar with a mortar pump

Mapegrout 430 is a fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete.

MAPEGROUT 430

Show products

Featured Products

MAPEGROUT 430

Fine-grained, fibre-reinforced, normal-setting thixotropic mortar for repairing concrete.

Restoration, All Video Tutorials

Mapei | Mapegrout Easy Repair | Restoration of a concrete wall with a mortar pump

Mapegrout Easy Repair is a normal-setting thixotropic mortar for repairing deteriorated concrete.

MAPEGROUT EASY REPAIR

Show products

Featured Products

MAPEGROUT EASY REPAIR

Normal-setting thixotropic mortar for repairing deteriorated concrete.

Show all

Sealing and bonding

1 - 3 of 4

Waterproofing, Sealing and bonding, All Video Tutorials, Restoration

Repair work on a road viaduct

This video illustrates a series of systems offered by Mapei to carry out long-lasting repair work on road…

ADESILEX PG4

MAPECURE CA

MAPEGROUT EASY FLOW

+ 17

Show products

Featured Products

ADESILEX PG4

MAPECURE CA

Paintable, film-forming, light-coloured acrylic curing agent in solvent for mortar and concrete. TECHNICAL DATA: Application: roller or spray. Consumption: 0.11-0.15 kg/m². Packaging: 10 kg tanks.

MAPEGROUT EASY FLOW

MAPEBAND TPE

PRIMER SN

MAPESHIELD I

MAPEFLEX PU65

MAPELASTIC GUARD

MAPEGROUT BETONTECH HPC

PRIMER RM

PLASTIMUL

PURTOP 400 M

PLANIGROUT 300

EPOJET

MAPEFLOOR I 900

PLANIBOND BA 100

PURTOP PRIMER BLACK

MAPESIL BM

MAPEFIX VE SF

Styrene-free, hybrid vinyl resin-based chemical anchor for structural loads. Certified for threaded bar, construction bars and C1 seismic loads.

MAPEFLOOR EP 90

Sealing and bonding, All Video Tutorials

Mapeflex AC-P | Invisible sealing of cracks and joints

Mapeflex AC-P for smooth finish compared with Mapeflex AC4 ideal for rough finish.

MAPEFLEX AC4

MAPEFLEX AC-P

Show products

Featured Products

MAPEFLEX AC4

Paintable acrylic sealant for movements up to 12.5% with a smooth effect. TECHNICAL DATA: Movement in service: 12.5%. Modulus of elasticity at 50% elongation: 0.20 N/mm². Shore A hardness: 10. Workability time: 10 minutes. Colours: white and grey. EMICODE: EC1 Plus - very low emission. Application: extrusion gun, trowel, pneumatic pump. Consumption: 3.1 linear metres per 310 ml cartridge (10x10 mm section). Packaging: 310 ml cartridges and 550 ml soft- cartridges.

MAPEFLEX AC-P

Paintable acrylic sealant with a render-effect finish for movements up to 12.5%. TECHNICAL DATA: Movement in service: 12.5%. Modulus of elasticity at 50% elongation: 0.11 N/mm². Shore A hardness: 15. Workability time: 15 minutes. Colour: white. EMICODE: EC1 Plus - very low emission. Application: extrusion gun, trowel. Consumption: 3.1 linear metres per 310 ml cartridge (10x10 mm section). Packaging: 310 ml cartridges.

Sealing and bonding, All Video Tutorials

Mapesil AC and Ultrabond MS Rapid | How to install and seal a shower plate

Ultrabond MS Rapid can be used for installation of shower plate, Mapesil AC for sealing it together with wall…

ULTRABOND MS RAPID

MAPESIL AC

Show products

Featured Products

ULTRABOND MS RAPID

Rapid-setting, deformable, hybrid assembly adhesive for internal and external use, with a high initial sucker effect.

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Show all

Sports flooring

1 - 1 of 1

Sports flooring, All Video Tutorials

Mapecoat TNS Extreme: Resin floors for urban design

For resin-coated areas open to vehicles, cycle lanes, pedestrian zones

MAPECOAT TNS EXTREME

Show products

Featured Products

MAPECOAT TNS EXTREME

Two-component rapid-drying epoxy-acrylic coloured top-coating also for car traffic areas

Show all

Stone paving

1 - 2 of 2

Stone paving, All Video Tutorials

Mapestone System: Stone installation

Porphyry installation Mapestone System

MAPESTONE PFS 2

MAPESTONE TFB 60

MAPESTONE PFS 2 VISCO

+ 1

Show products

Featured Products

MAPESTONE PFS 2

MAPESTONE TFB 60

Pre-blended mortar with high compressive strength and good resistance to de-icing salts, freeze-thaw cycles and seawater with exceptional physical-chemical characteristics suitable for areas exposed to dry/damp cycles specified by exposure class XF4, for installation screeds for architectonic stone flooring.

MAPESTONE PFS 2 VISCO

Low viscosity ready-mixed mortar with high compressive strength and resistant to de-icing salts, freeze-thaw cycles and seawater, with exceptional physical chemical characteristics suitable for areas exposed to dry/damp cycles specified by exposure class XF4. for grouting architectural slab and block-paved road surfaces.

MAPESTONE PFS PCC 2

Pre-blended, polymer-modified mortar with a low modulus of elasticity, high compressive strength and good resistance to de-icing salts, freeze-thaw cycles and seawater with exceptional physical-chemical characteristics suitable for areas exposed to dry/damp cycles specified by exposure class XF4, for grouting architectonic stone floors.

Stone paving, All Video Tutorials

Mapestone Joint for phorphyry installation

Phorphyry setts stone paving refurbishing with a flexible and pervious system.

MAPESTONE JOINT

Show products

Featured Products

MAPESTONE JOINT

One-component, solvent-free, non-flammable polyurethane binder with a characteristic odour for creating elastic and pervious architectural road surfaces. Areas of use: sealing grout lines between setts, paving bricks and cobblestones used to create architectural road; surfaces for vehicle use installing and sealing paving for pedestrian and light vehicle use.

Show all

Structural strengthening

1 - 2 of 2

Structural strengthening, All Video Tutorials

Planitop HPC Floor

PLANITOP HPC FLOOR

Show products

Featured Products

PLANITOP HPC FLOOR

Fibre-reinforced, shrinkage-compensated, high-strength, high-ductility, highly-fluid cementitious mortar.

Structural strengthening, All Video Tutorials

MapeWrap EQ System - antiseismic system for schools

MAPEWRAP EQ SYSTEM

Show products

Featured Products

MAPEWRAP EQ SYSTEM

Strengthening system for load-bearing facing walls and secondary elements

Show all

Waterproofing

1 - 3 of 7

Waterproofing, All Video Tutorials

Mapelastic - The waterproofer for balconies and terraces

ADESILEX P4

MAPELASTIC

MAPEBAND

+ 5

Show products

Featured Products

ADESILEX P4

MAPELASTIC

Two-component, flexible cementitious mortar for waterproofing balconies, terraces, bathrooms and swimming pools.

MAPEBAND

MAPENET 150

DRAIN VERTICAL DRAIN LATERAL

PLANITOP RASA & RIPARA

Quick-setting, fibre-reinforced, compensated-shrinkage, thixotropic cementitious mortar for repairing and smoothing concrete, applied in various thicknesses of from 3 to 40 mm in a single layer.

ULTRACOLOR PLUS

MAPESIL AC

Pure, mould-resistant, acetic silicone sealant with BioBlock ® technology for movements up to 25%.

Waterproofing, All Video Tutorials

Mapelastic Turbo - waterproofing of balcony

Two-component rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at…

MAPETEX SEL

MAPENET 150

MAPELASTIC TURBO

+ 2

Show products

Featured Products

MAPETEX SEL

Macro-holed, non-woven polypropylene fabric for reinforcing waterproofing membranes. TECHNICAL DATA: Weight: 80 g/m². Thickness: 0.6 mm. Tensile strength: 5 kN/m. Deformation at maximum strain: – 80% in a longitudinal direction; – 45% in a transversal direction. Packaging: 25 m x 1 m rolls.

MAPENET 150

MAPELASTIC TURBO

Two-component rapid-drying elastic cementitious mortar for waterproofing terraces and balconies, including at low temperatures and on substrates not completely dry.

ELASTORAPID

Two-component, high-performance, highly-deformable, quick-setting and drying cementitious adhesive with no vertical slip and extended open time for ceramic tiles and stone material. TECHNICAL DATA: Pot life of mix: 60-75 minutes. Open time: 30 minutes. Waiting time before grouting: 3 hours. Set to light foot traffic: approx. 2-3 hours. Ready for use: approx. 24 hours (3 days for basins and swimming pools). Deformability according to EN 12004: S2 - highly deformable. Colours: grey and white. Application: N° 4, 5, 6 or 10 notched trowel. Storage: comp. A: 12 months; comp. B: 24 months. Protect from frost. Consumption: 3-8 kg/m². Packaging: ELASTORAPID white: 31.25 kg kit comp. A: 25 kg / comp. B: 6.25 kg. ELASTORAPID grey: 31.25 kg kit comp. A: 25 kg / comp. B: 6.25 kg.

ULTRACOLOR PLUS

Waterproofing, Sealing and bonding, All Video Tutorials, Restoration

Repair work on a road viaduct

This video illustrates a series of systems offered by Mapei to carry out long-lasting repair work on road…

ADESILEX PG4

MAPECURE CA

MAPEGROUT EASY FLOW

+ 17

Show products