Arkea Arena, Floirac-Bordeaux (France)

WHITE CONCRETE AT THE HEART OF THE PROJECT

Almost two years of work, 3 cranes operating at the same time on site, a workforce of 120, which increased to 200 in peak periods, 125,000 working hours and more than 10,000 m³ of white concrete placed. These are the figures of the technical and aesthetic challenges the main contractor had to tackle in order to build this curved concrete structure, with the same shade of white extending over its entire surface.

Most stadiums and arenas for entertainment events are covered with either metal or glass, whereas here the preference was concrete. As Ricciotti declared, "We could have built the Arena using precast concrete elements assembled on site, but we would never have been able to achieve the desired effect. And this is the reason why we relied on the more complex technique of using concrete cast on site”.

Even though the technique of casting concrete on site is undoubtedly a more complex option, it allows for better control of the final result. Formulated and supplied by Lafarge Beton, the white concrete was cast directly into 350 large wooden formworks designed especially for this site over a period of ten months.

In order to get a good final result and make sure the same shade of white was created over the entire surface of the building, Mapei France Technical Services recommended to use NIVOPATE FIN and coloured NIVOPATE FIN, which are manufactured and distributed on the French market by Mapei France. These products are smoothing compounds in paste which are mixed with cement or plaster. They are easy to apply in layers from 0 to 50 mm thick and it make the final colour homogeneous, depending on the type of binder used.

To complete the intervention on the shell, the white concrete surface (4.800 m²) was protected with ANTIPLUVIOL W, a colourless water-repellent impregnator based on silicon compounds in water solution.

To carry out minor repairs on the vertical and internal surfaces (stairways, walls and columns) of some precast concrete elements, it was recommended to apply PLANITOP 350 (class R2 semi-rapid-setting mortar), PLANITOP 450 (class R4 normal-setting mortar) and PLANITOP 400 F (class R3 rapid-setting mortar). All these mortars are manufactured and distributed on the French market by Mapei France.

Another technical challenge was the the metallic structure. In fact, the spectator stands in the Arkea Arena were also made from cast concrete. The roof is supported by a structure with two main beams, with one of them 55 m in length and the other 82 m in length. To lift the beams and the sections of the framework, a 700-ton crane was required, and it took a whole month to assemble it inside the Arena. While the other cranes were positioning the last formwork, MAPEFILL F high-performance mortar was used to anchor and seal the metallic structures and pre-cast concrete stairs in place.

This article was taken from Mapei & Vous no. 48, the in-house magazine published by Mapei France, whom we would like to thank. For further information see www.mapei.fr.