Back

Keracolor S

Keracolor S

Premium Sanded Grout with Polymer

Keracolor S is a premium-grade, pre-blended, polymer-modified sanded Portland-cement tile grout that requires only the addition of water for mixing. It will grout joints from 1/8" to 5/8" (3 to 16 mm).

WHERE TO BUY

Color Palette

5002 Pewter

5005 Chamois

5009 Gray

5010 Black

Discover the full color palette

Product documentation

Brochures

Grout Troubleshooting Guide

Last Projects with Keracolor S

Show all projects with Keracolor S

Keracolor S is part of the lines:

Tile & Stone Installation Systems - Cement Grouts

F.A.Q.

Can I mix just a part of my bag of grout?

Yes, it is possible to mix less than a full bag of grout. See our document: “Mixing partial units of grout.”

Share, add to your favorite or print

Do I need to do anything differently when installing tile in hot weather?

Yes, the hotter the temperature, the faster the cement grout dries. Consult our technical bulletin: “Installing tile in hot weather.”

Share, add to your favorite or print

My grout joints are uneven or too deep; can I add more grout overtop?

No, a cement-based grout needs 2/3 the thickness of the tile for proper placement. Scrape it away and re-grout any grout joints with this condition.

Share, add to your favorite or print

How long do I have to wait after installing ceramic tile with cement-based grout to use my shower?

3 days minimum

Share, add to your favorite or print

Why is my grout discolored?

Possible causes are:

Washed with excessive amounts of water.
Too much water was mixed-in with the grout.
Grouted before mortar was fully dry, with moisture from the mortar trapped under the tile.
Wall tiles may be inherently over-absorbent.

In all cases, apply UltraCare Grout Refresh to the grout joints.

Share, add to your favorite or print

LEARN MORE ABOUT ULTRACARE

View all faqs

Keracolor S

Keracolor S